               **************************************************
               *        100/10M Ethernet PCI Adapter            *
               *                  NDIS 5 Driver                 *
               *        for Windows 2000 Installation Guide     *
               **************************************************

-----------------------
Installation Procedure 
-----------------------

 1. Plug the adapter into one of the Master PCI slots of your PC.

 2. Power on your PC.

 3. Open Windows 2000 operating system.

 4. Windows 2000 will prompt "PCI Ethernet Controller" in "Found New Hardware
    Wizard" dialog box, then click <NEXT> button.

 5. Select "Search for a suitable driver for my device" from "Found New Hardware 
    Wizard" dialog box, then click <NEXT> button.

 6. Select "Specify a location" from "Optional search locations:" of "Found New
    Hardware Wizard" dialog box, then click <NEXT> button.

 7. Insert driver disk bundled with "100/10M Ethernet PCI Adapter".

 8. Enter the driver pathname, then click the <NEXT> button from "Found New 
    Hardware Wizard" dialog box.

      Example :

             A:\WIN2000
      
 8. Select your installed adapter - "100/10M Ethernet PCI Adapter"
    , then click the <NEXT> button from the dialog box.

 9. To complete the process, please follow the instructions on the screen.


 

